I cant get freesync to work at all, even when it says its enabled.
AOC U2879VF monitor, supports freesync and says its enabled in the OSD (plugged in with DP to DP cable), tried with and without monitor driver and also turning freesync off and on in the OSD. (4k desktop).
RX580 8GB graphics card.
Freesync says its enabled under AMD Radeon settings, Display (40-60 freesync range shown).
I've tried with and without vsync. Creating game profiles and making sure it says freesync ON under the settings (also tried without a profile). Limiting FPS with FRTC and also leaving it disabled.
The tearing is terrible and more pronounced compared to when I was using an HD7950 without freesync.
If I load up Project Cars 2, turn on my windscreen wipers I can instantly see a tear going straight across almost the middle of the display.
OSD = On Screen Display
DP = Display Port
FPS = Frames Per Second
FRTC = Frame Rate Target Control
Others have found a Firmware update for their monitors and had success (different model).
I've done a lot of testing and googling, but haven't had any luck. Any advice greatly appreciated.